Inhemeter Prepaid Meter Codes: Active Codes

Inhemeter Prepaid Meter is a global meter brand that is used in managing utility consumption and to simplify its functions, it has different codes that consumers can use to operate it.

There are many Inhemeter prepaid meter codes that can be used to perform a particular function on the meter. The meter has codes for various functions, such as meter activation, checking of meter number, checking of balance, and checking of voltage or current, among others. These codes are unique and can only perform one function.

However, before we proceed with the discussion, it is important for you to know that there are two major types of prepaid inhemeters, viz., single-phase and three-phase inhemeters. Each type has its own operational code. So, before you use this code to perform a function, it is best to know the type that you’re using to enable you to choose the appropriate code for it.

Once you know the prepaid Inhemeter codes, you will be able to perform a number of functions on your meter seamlessly. In fact, with these codes, you can comfortably fix your Inhemeter should it develop a fault without seeking technician assistance.

Table of Contents

Inhemeter Prepaid Meter Codes List

There are many prepaid Inhemeter codes that are function-specific. The code list is summarised in the table below, with the meter function attached to each code for both single-phase and three-phase types.

Click HERE to register on VTUBase and buy cheap data as low as N200 Per 1GB

S/N	Function	Inhemeter Single Phase Code	InhemeterThree Phase Code
1.	Meter Activation	37120	37120
2.	Logoff Return Token	54	C6015
3.	Remaining Balance	00	C501
4.	Remaining Emergency Balance	38/59	–
5.	Last Recharge Amount	31	CL401
6.	Emergency Balance Start	89898686	89898686
7.	Meter Number	30	C10
8.	Sanction Load	19	21350
9.	Status of Friendly Mode	51/51/56	C6011, C6012
10.	Voltage	07	L1-3270, L2-5270, and L3-7270
11.	Current	08	L1-3170, L2-5170, and L3-7170
12.	Overdraw Threshold	38	C505
13.	Tariff Solution	03	C701
14.	Last Recharge Token	53	C6014
15.	Token Sequence Number	52	C6013
16.	Current Month Uses	01	–

Table1.1: Inhemeter prepaid meter codes

Conclusion

So here you have it—Inhemeter prepaid meter codes are like little shortcuts that make managing your utility meter easier. Whether you’re activating the meter, checking your balance, or even troubleshooting a minor issue, these codes let you take control without always needing a technician. It’s like having a cheat sheet for your energy usage right at your fingertips.

Now, the key is knowing which type of Inhemeter you have—single-phase or three-phase—because the codes are specific to each. Once you’re familiar with the codes, you’ll find managing your meter is not just simpler, but it puts you in the driver’s seat when it comes to controlling your energy consumption. So, the next time you’re wondering about your balance or meter number, just punch in the right code, and you’re all set. It’s really that straightforward!