Conlog Prepaid Meter Codes: Information & Error Codes

If you’re using a Conlog prepaid meter in your home or office, it is important for you to know their codes so that you will be able to perform certain functions seamlessly. 

When you know the Conlog prepaid meter codes, you will be able to check your meter number, credit balance, etc. by just dialing the code on your meter’s CIU. This code will save you lots of stress because it will help you carry out some functions on your Conlog prepaid meter effortlessly.

In this guide, we are going to show you the common codes that you can use daily to operate the Conlog prepaid meter. Not only that, we’ll also elaborate on the Conlong prepaid meter error codes to help you identify the errors when your meter is malfunctioning and how to fix them. 

Conlog Prepaid Meter Codes South Africa & Nigeria

Conclog has different codes that their prepaid meter users can use to operate the meter. Each code is specific to a particular function. The Conlog prepaid meter code is summarized in the table below:

S/N	Code	Function
1.	#73#	Trip condition
2.	#43#	Meter commission
3.	#074#	Estimated time remaining until zero credit
4.	#	Duration remaining over an average consumption based on 24-hour period
5.	#100#	Meter serial number
6.	009	Credit balance
7.	006	Tariff index
8.	077	Total credit entered
9.	076	Total consumption till date
10.	150	Daily consumption limit

N/B

These codes may vary slightly depending on your country of residence. So, if you try any of the codes and they are not functioning, we recommend that you contact Conlog for a specific code within your region. 

Conlog Prepaid Meter Error Codes

Just like other prepaid meter brands, the Conlog meter may display an error when you’re using it. So, we have decided to list some of their error codes, meanings, and solutions. Kindly go through the table below to get the full list. 

S/N	Code	Meaning	Solution
1.	E01	Meter not initialised	Contact Conlog
2.	E02	Meter not calibrated	Contact Conlog
3.	E03	Internal error	Contact Conlog
4.	E04	No supply voltage is present	Try again later
5.	E05	Reserved for future use	Use it in the future
6.	E05	Reserved for future use	Use it in the future
7.	E07	Communication error between the meter and WCIU	Try again later
8.	E08	Wireless user interface error	Try again later
9.	E09	Incompatibility between the meter and WCIU	Try again later
10.	E10	Software error	Contact Conlog
11.	E12	Communication protocol error between meter and WCIU	Try again later
12.	E20	Remote disconnection initiated	–

Conclusion

Conlog has different codes for their prepaid meter. These codes are function-specific. Apart from the common daily codes, Conlog also has error codes, which normally display when the meter is having an issue. These codes are very important to all Conlog prepaid meter users because they are useful on a daily basis.

However, these codes and their functions may vary slightly depending on the user’s country of residence. So, if any of the codes listed in this article don’t work on your meter,. We strongly recommend that you reach out to Conclog customer care for them to assist you with your region’s specific code.